CoroSync+Drbd+MySQL实现MySQL的高可用集群

节点规划：

为工农等地区用户提供了全套网页设计制作服务，及工农网站建设行业解决方案。主营业务为网站设计制作、网站制作、工农网站设计，以传统方式定制建设网站，并提供域名空间备案等一条龙服务，秉承以专业、用心的态度为用户提供真诚的服务。我们深信只要达到每一位用户的要求，就会得到认可，从而选择与我们长期合作。这样，我们也可以走得更远！

node1.huhu.com172.16.100.103

node2.huhu.com172.16.100.104

资源名称规划：

资源名称：可以是除了空白字符外的任意ACSII码字符

DRBD设备：在双节点上，此DRBD设备文件，一般为/dev/drbdN，主设备号147

磁盘：在双方节点上，各自提供存储设备

网络配置：双方数据同步所使用的网络属性

DRBD从Linux内核2.6.33起已经整合进内核

1.配置双击互信（基于秘钥认证），HOSTS文件，时间同步

1）所有节点的主机名称和对应的IP地址解析服务可以正常工作，且每个节点的主机名称需要跟"uname -n“命令的结果保持一致；因此，需要保证两个节点上的/etc/hosts文件均为下面的内容：

 
 
  
  172.16.100.103node1.huhu.com node1   
  
  172.16.100.104node2.huhu.com node2

Node1:

 
 
  
  #sed -i 's@\(HOSTNAME=\).*@\1node1.huhu.com@g' /etc/sysconfig/network   
  
  #hostname node1.huhu.com

Node2：

 
 
  
  #sed -i 's@\(HOSTNAME=\).*@\1node2.huhu.com@g' /etc/sysconfig/network   
  
  #hostname node2.huhu.com

2）设定两个节点可以基于密钥进行ssh通信，这可以通过类似如下的命令实现：

 
 
  
  #yum install openssh-clients

Node1:

 
 
  
  #ssh-keygen -t rsa   
  
  #ssh-copy-id -i ~/.ssh/id_rsa.pub root@node2

Node2:

 
 
  
  #ssh-keygen -t rsa   
  
  #ssh-copy-id -i ~/.ssh/id_rsa.pub root@node1

配置时间同步：

 
 
  
  */5* * * * root /usr/sbin/ntpdate ntp.api.bz & > /dev/null

2.创建和配置DRBD

Node1上执行：

 
 
  
  #rpm -Uvh http://www.elrepo.org/elrepo-release-6-6.el6.elrepo.noarch.rpm   
  
  #ssh node2 'rpm -Uvh http://www.elrepo.org/elrepo-release-6-6.el6.elrepo.noarch.rpm'  
  
  #yum update -y   
  
  #ssh node2 'yum update -y'   
  
  #yum install drbd84-utils kmod-drbd84 -y   
  
  #ssh node2 'yum install drbd84-utils kmod-drbd84 -y'

加载模块到内核：

 
 
  
  #/sbin/modprobe drbd   
  
  #ssh node2 '/sbin/modprobe drbd'

DRBD的配置文件：

 
 
  
  /etc/drbd.conf  
  
  /etc/drbd.d/global_common.conf  
  
  /etc/drbd.d/resource.d/  
  
  #yum -y install parted   
  
  #ssh node2 'yum -y install parted'   
  
  #fdisk /dev/sdb

n新建分区

p主分区

1分区号，两车回车按照默认大小选择

wq保存退出

 
 
  
  #partprobe /dev/sdb1

资源规划：

资源名称：mydrbd

DRBD设备：/dev/drbd0

磁盘：/dev/sdb1

网络配置：100M

 
 
  
  #cat /etc/drbd.d/global_common.conf | grep -v "#"

 
 
  
  #cat /etc/drbd.d/global_common.conf | grep -v "#"   
  
  global{   
  
  usage-countyes;   
  
  }  
  
  common{   
  
  handlers{   
  
  pri-on-incon-degr"/usr/lib/drbd/notify-pri-on-incon-degr.sh;/usr/lib/drbd/notify-emergency-reboot.sh; echo b > /proc/sysrq-trigger ;reboot -f";   
  
  pri-lost-after-sb"/usr/lib/drbd/notify-pri-lost-after-sb.sh;/usr/lib/drbd/notify-emergency-reboot.sh; echo b > /proc/sysrq-trigger ;reboot -f";   
  
  local-io-error"/usr/lib/drbd/notify-io-error.sh; /usr/lib/drbd/notify-emergency-shutdown.sh;echo o > /proc/sysrq-trigger ; halt -f";   
  
  }  
  
  startup{   
  
  }  
  
  options{   
  
  }  
  
  disk{   
  
  on-io-errordetach;   
  
  }  
  
  net{   
  
  cram-hmac-alg "sha1";   
  
  shared-secret "1q2w3e4r5t6y";   
  
  }  
  
  syncer{   
  
  rate 200M;   
  
  }  
  
  }  
  
  #cat mydrbd.res   
  
  resourcemydrbd {   
  
  device/dev/drbd0;   
  
  disk/dev/sdb1;   
  
  meta-diskinternal;   
  
  onnode1.huhu.com {   
  
  address172.16.100.103:7789;   
  
  }  
  
  onnode1.huhu.com {   
  
  address172.16.100.104:7789;   
  
  }  
  
  }

复制配置文件到node2节点

 
 
  
  scp-r /etc/drbd.* node2:/etc/

在两个节点上，初始化已定义的资源，并启动服务

 
 
  
  #drbdadm create-md mydrbd

 
 
  
  #ssh node2 'drbdadm create-md mydrbd'   
  
  #/etc/init.d/drbd start   
  
  #ssh node2 '/etc/init.d/drbd start'

查看DRBD设备的状态：

 
 
  
  #cat /proc/drbd   
  
  version:8.4.4 (api:1/proto:86-101)   
  
  GIT-hash:599f286440bd633d15d5ff985204aff4bccffadd build by phil@Build64R6, 2013-10-1415:33:06   
  
  0:cs:Connected ro:Secondary/Secondaryds:Inconsistent/Inconsistent C r-----   
  
  ns:0nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:2096348

目前两个节点都处于secondary状态，手动让其node1成为主节点：

 
 
  
  #drbdadm -- --overwrite-data-of-peer primary mydrbd   
  
  #cat /proc/drbd   
  
  version:8.4.4 (api:1/proto:86-101)   
  
  GIT-hash:599f286440bd633d15d5ff985204aff4bccffadd build by phil@Build64R6, 2013-10-1415:33:06   
  
  0:cs:Connected ro:Primary/Secondary ds:UpToDate/UpToDateC r-----   
  
  ns:2096348nr:0 dw:0 dr:2097012 al:0 bm:128 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:0

在primary节点上进行格式化drbd分区然后挂载

#mke2fs -j /dev/drbd0

#mkdir /mydata

#mount /dev/drbd0 /mydata/

#cp /etc/inittab /mydata/

#ls -lh /mydata/

total20K

-rw-r--r--.1 root root 884 Jul 8 17:24 inittab

drwx------.2 root root 16K Jul 8 17:23 lost+found

到此drbd分区已经可以正常使用了

DRBD分区的主备切换

primary节点上执行：

#umount /mydata/

# drbdadm secondary mydrbd

#drbd-overview

0:mydrbd/0Connected Secondary/Secondary UpToDate/UpToDateC r-----

secondary上执行

#drbd-overview 确保两者的状态都有secondary状态

#drbdadm primary mydrbd

#mkdir -p /mydata

# mount /dev/drbd0 /mydata/

#ls -lh /mydata/

total20K

-rw-r--r--.1 root root 884 Jul 8 17:24 inittab

drwx------.2 root root 16K Jul 8 17:23 lost+found

#drbd-overview

0:mydrbd/0Connected Primary/Secondary UpToDate/UpToDate Cr----- /mydata ext3 2.0G 36M 1.9G 2%

状态已经改变，primary /secondary

#p#

3.配置coresync服务

各个节点上停止掉drbd服务，并且关闭开机启动

#/etc/init.d/drbd stop

#ssh node2 '/etc/init.d/drbd stop'

#chkconfig drbd off

#ssh node2 'chkconfig drbd off'

#chkconfig --list | grep drbd

#ssh node2 'chkconfig --list | grep drbd'

drbd0:off 1:off 2:off 3:off 4:off 5:off 6:off

安装corosync

#yum install libibverbs librdmacm lm_sensors libtool-ltdl openhpi-libs openhpiperl-TimeDate

#yum install corosync pacemaker

#ssh node2 '# yum install libibverbs librdmacm lm_sensors libtool-ltdlopenhpi-libs openhpi perl-TimeDate'

wgethttp://ftp5.gwdg.de/pub/opensuse/repositories/network:/ha-clustering:/Stable/CentOS_CentOS-6/x86_64/crmsh-2.1-1.1.x86_64.rpm&& wgethttp://ftp5.gwdg.de/pub/opensuse/repositories/network:/ha-clustering:/Stable/CentOS_CentOS-6/x86_64/pssh-2.3.1-4.1.x86_64.rpm

#ssh node2 'wget http://ftp5.gwdg.de/pub/opensuse/repositories/network:/ha-clustering:/Stable/CentOS_CentOS-6/x86_64/crmsh-2.1-1.1.x86_64.rpm&& wgethttp://ftp5.gwdg.de/pub/opensuse/repositories/network:/ha-clustering:/Stable/CentOS_CentOS-6/x86_64/pssh-2.3.1-4.1.x86_64.rpm'

yum--nogpgcheck localinstall crmsh-2.1-1.1.x86_64.rpm pssh-2.3.1-4.1.x86_64.rpm

如果安装失败，请添加以下源

#vim /etc/yum.repos.d/ha-clustering.repo

[haclustering]

name=HAClustering

baseurl=http://download.opensuse.org/repositories/network:/ha-clustering:/Stable/CentOS_CentOS-6/

enabled=1

gpgcheck=0

#yum --nogpgcheck localinstall crmsh-2.1-1.1.x86_64.rpmpssh-2.3.1-4.1.x86_64.rpm

node2上同样执行以上

配置corosync

#cd /etc/corosync/

#cp corosync.conf.example corosync.conf

#cat corosync.conf | grep -v "^#" | sed -e'/^$/d'

compatibility: whitetank

totem {

version: 2

secauth: on

threads: 2

interface {

ringnumber: 0

bindnetaddr: 172.16.100.0

mcastaddr: 226.94.8.9

mcastport: 5405

ttl: 1

}

logging {

fileline: off

to_stderr: no

to_logfile: yes

to_syslog: no

logfile: /var/log/cluster/corosync.log

debug: off

timestamp: on

logger_subsys {

subsys: AMF

debug: off

}

service {

ver: 0

name: pacemaker

# use_mgmtd: yes

}

aisexec {

user: root

group: root

}

amf {

mode: disabled

}

生成秘钥

#corosync-keygen

#scp -p authkey corosync.conf node2:/etc/corosync/

创建日志文件目录

#mkdir -p /var/log/cluster/ -pv

# ssh node2 'mkdir -p /var/log/cluster/ -pv'

启动corosync服务

#service corosync start

#ssh node2 'service corosync start'

检查corosync引擎是否已经启动

#grep -e "Corosync Cluster Engine" -e "configuration file"/var/log/cluster/corosync.log

Jul09 10:28:14 corosync [MAIN ] Corosync Cluster Engine ('1.4.1'): started andready to provide service.

Jul09 10:28:14 corosync [MAIN ] Successfully readmain configuration file '/etc/corosync/corosync.conf'.

查看节点成员之间通信是否正常

#grep TOTEM /var/log/cluster/corosync.log

Jul09 10:28:14 corosync [TOTEM ] Initializing transport (UDP/IP Multicast).

Jul09 10:28:14 corosync [TOTEM ] Initializing transmit/receive security:libtomcrypt SOBER128/SHA1HMAC (mode 0).

Jul09 10:28:14 corosync [TOTEM ] The network interface[172.16.100.103] is now up.

Jul09 10:28:14 corosync [TOTEM ] A processor joined or left the membership and anew membership was formed.

Jul09 10:28:29 corosync [TOTEM ] A processor joined or left the membership and anew membership was formed.

检查pacemaker启动是否正常

#grep pcmk_startup /var/log/cluster/corosync.log

Jul09 10:28:14 corosync [pcmk ] info: pcmk_startup: CRM: Initialized

Jul09 10:28:14 corosync [pcmk ] Logging: Initialized pcmk_startup

Jul09 10:28:14 corosync [pcmk ] info: pcmk_startup:Maximum core file size is: 18446744073709551615

Jul09 10:28:14 corosync [pcmk ] info: pcmk_startup: Service: 9

Jul09 10:28:14 corosync [pcmk ] info: pcmk_startup: Local hostname: node1.huhu.com

查看错误信息

#grep ERROR /var/log/cluster/corosync.log | grep -v unpack_resources

Jul09 10:28:14 corosync [pcmk ] ERROR: process_ais_conf: You have configured acluster using the Pacemaker plugin for Corosync. The plugin is not supported inthis environment and will be removed very soon.

Jul09 10:28:14 corosync [pcmk ] ERROR: process_ais_conf: Please see Chapter 8 of'Clusters from Scratch' (http://www.clusterlabs.org/doc) for details on usingPacemaker with CMAN

Jul09 10:28:35 [1373] node1.huhu.com pengine: notice: process_pe_message:Configuration ERRORs found during PE processing. Please run "crm_verify-L" to identify issues.

注意：这里因为没有使用stonith设备，因此错误可以忽略

#crm status

Lastupdated: Wed Jul 9 10:49:53 2014

Lastchange: Wed Jul 9 10:19:07 2014 via crmd on node1.huhu.com

Stack:classic openais (with plugin)

CurrentDC: node1.huhu.com - partition with quorum

Version:1.1.10-14.el6_5.3-368c726

2Nodes configured, 2 expected votes

0Resources configured

Online:[ node1.huhu.com node2.huhu.com ]

以上说明corosync配置启动正常。

关闭stonith设备，并验证提交

crm(live)#configure

crm(live)configure#property stonith-enabled=false

crm(live)configure#verify

crm(live)configure#commit

关闭不具备法定票数的时候，不能关闭集群服务

crm(live)configure# property no-quorum-policy=ignore

crm(live)configure#verify

crm(live)configure#commit

配置资源粘性，更倾向于当前节点

crm(live)configure#rsc_defaults resource-stickiness=100

crm(live)configure#verify

crm(live)configure#commit

查看当前的配置

crm(live)configure#show

nodenode1.huhu.com

nodenode2.huhu.com

propertycib-bootstrap-options: \

dc-version=1.1.10-14.el6_5.3-368c726\

cluster-infrastructure="classicopenais (with plugin)" \

expected-quorum-votes=2\

stonith-enabled=false\

no-quorum-policy=ignore

rsc_defaultsrsc-options: \

resource-stickiness=100

crm(live)configure#

查看drbd的资源代理

crm(live)configure#cd ..

crm(live)#ra

crm(live)ra#providers drbd

linbit

注意：这里只有linbit没有beartbeat，corosync1.4以前的版本有heartbeat。

查看原数据

crm(live)ra#meta ocf:linbit:drbd

定义资源：

crm(live)configure#primitive mysql_drbd ocf:linbit:drbd paramsdrbd_resource=mydrbd op start timeout=240 op stop timeout=100 op monitorrole=Master interval=50s timeout=30s op monitor role=Slave interval=60s timeout=30s

定义群集资源：

crm(live)configure#master MS_mysql_drbd mysql_drbd metamaster-max="1" master-node-max="1" clone-max="2"clone-node-max="1" notify="true"

crm(live)configure#show mysql_drbd

primitivemysql_drbd ocf:linbit:drbd \

paramsdrbd_resource=mydrbd \

opstart timeout=240 interval=0 \

opstop timeout=100 interval=0 \

opmonitor role=Master interval=50s timeout=30s \

opmonitor role=Slave interval=60s timeout=30s

crm(live)configure#show MS_mysql_drbd

msMS_mysql_drbd mysql_drbd \

metamaster-max=1 master-node-max=1 clone-max=2 clone-node-max=1 notify=true

crm(live)configure#verify

crm(live)configure#commit

crm(live)configure#cd

crm(live)#status

Lastupdated: Wed Jul 9 11:54:30 2014

Lastchange: Wed Jul 9 11:54:17 2014 via cibadmin on node1.huhu.com

Stack:classic openais (with plugin)

CurrentDC: node2.huhu.com - partition with quorum

Version:1.1.10-14.el6_5.3-368c726

2Nodes configured, 2 expected votes

2Resources configured

Online:[ node1.huhu.com node2.huhu.com ]

Master/Slave Set: MS_mysql_drbd [mysql_drbd]

Masters: [ node1.huhu.com ]

Slaves: [ node2.huhu.com ]

crm(live)#

主从资源已经定义完成

[root@node1corosync]# drbd-overview

0:mydrbd/0Connected Primary/Secondary UpToDate/UpToDate C r-----

[root@node1corosync]#

此时当前节点已经成为主资源了

手动做一次主从切换：

#crm node standby

#crm status

Lastupdated: Wed Jul 9 12:01:44 2014

Lastchange: Wed Jul 9 12:01:29 2014 via crm_attribute on node1.huhu.com

Stack:classic openais (with plugin)

CurrentDC: node2.huhu.com - partition with quorum

Version:1.1.10-14.el6_5.3-368c726

2Nodes configured, 2 expected votes

2Resources configured

Nodenode1.huhu.com: standby

Online:[ node2.huhu.com ]

Master/SlaveSet: MS_mysql_drbd [mysql_drbd]

Masters:[ node2.huhu.com ]

Stopped:[ node1.huhu.com ]

#crm node online

#crm status

Lastupdated: Wed Jul 9 12:02:46 2014

Lastchange: Wed Jul 9 12:02:43 2014 via crm_attribute on node1.huhu.com

Stack:classic openais (with plugin)

CurrentDC: node2.huhu.com - partition with quorum

Version:1.1.10-14.el6_5.3-368c726

2Nodes configured, 2 expected votes

2Resources configured

Online:[ node1.huhu.com node2.huhu.com ]

Master/SlaveSet: MS_mysql_drbd [mysql_drbd]

Masters:[ node2.huhu.com ]

Slaves:[ node1.huhu.com ]

#drbd-overview

0:mydrbd/0Connected Secondary/Primary UpToDate/UpToDate C r-----

[root@node1corosync]#

当前节点就切换为从节点了

此时保证了资源可以主从切换，但是文件系统是没有挂载

因此必须定义文件系统

crm(live)configure#primitive mystore ocf:heartbeat:Filesystem paramsdevice=/dev/drbd0 directory=/mydata fstype=ext3 op start timeout=60 op stoptimeout=60

crm(live)configure#verify

注意：这里千万不要提交，因为必须保证文件系统跟主节点在一起，定义排列约束

crm(live)configure#colocation mystore_with_MS_mysql_drbd inf: mystoreMS_mysql_drbd:Master

定义存储资源必须和资源的主节点在一起

crm(live)configure#order mystore_after_MS_mysql_drbd mandatory:MS_mysql_drbd:promote mystore:start

定义存储资源必须在主节点启动后进行挂载

crm(live)configure#verify

crm(live)configure#commit

crm(live)configure#cd ..

crm(live)#status

Lastupdated: Wed Jul 9 12:25:25 2014

Lastchange: Wed Jul 9 12:22:30 2014 via cibadmin on node1.huhu.com

Stack:classic openais (with plugin)

CurrentDC: node2.huhu.com - partition with quorum

Version:1.1.10-14.el6_5.3-368c726

2Nodes configured, 2 expected votes

3Resources configured

Online:[ node1.huhu.com node2.huhu.com ]

Master/SlaveSet: MS_mysql_drbd [mysql_drbd]

Masters:[ node1.huhu.com ]

Slaves:[ node2.huhu.com ]

mystore(ocf::heartbeat:Filesystem): Started node1.huhu.com

crm(live)#

可以看到Master在node1上，mystore就启动在node1上

[root@node1~]# ls -lh /mydata/

total20K

-rw-r--r--.1 root root 884 Jul 8 17:24 inittab

drwx------2 root root 16K Jul 8 17:23 lost+found

[root@node1~]#

手动模拟一次切换

[root@node1corosync]# crm node standby

[root@node1corosync]# crm status

Lastupdated: Wed Jul 9 12:28:55 2014

Lastchange: Wed Jul 9 12:28:49 2014 via crm_attribute on node1.huhu.com

Stack:classic openais (with plugin)

CurrentDC: node2.huhu.com - partition with quorum

Version:1.1.10-14.el6_5.3-368c726

2Nodes configured, 2 expected votes

3Resources configured

Nodenode1.huhu.com: standby

Online:[ node2.huhu.com ]

Master/SlaveSet: MS_mysql_drbd [mysql_drbd]

Masters:[ node2.huhu.com ]

Stopped:[ node1.huhu.com ]

mystore(ocf::heartbeat:Filesystem): Started node2.huhu.com

[root@node1corosync]#

[root@node2~]# ls -lh /mydata/

total20K

-rw-r--r--.1 root root 884 Jul 8 17:24 inittab

drwx------2 root root 16K Jul 8 17:23 lost+found

Youhave new mail in /var/spool/mail/root

[root@node2~]#

这样就切换到node2节点上。

#p#

4.配置MySQL结合DRBD和corosync

分别在node1节点上创建MySQL用户和组

#groupadd -g 3306 mysql

#useradd -u 3306 -g mysql -s /sbin/nologin -M mysql

#id mysql

uid=3306(mysql)gid=3306(mysql) groups=3306(mysql)

#ssh node2 'groupadd -g 3306 mysql'

#ssh node2 'useradd -u 3306 -g mysql -s /sbin/nologin -M mysql'

#wgethttp://cdn.mysql.com/Downloads/MySQL-5.5/mysql-5.5.38-linux2.6-x86_64.tar.gz

#tar zxvf mysql-5.5.38-linux2.6-x86_64.tar.gz -C /usr/local/

#cd /usr/local/

#ln -s mysql-5.5.38-linux2.6-x86_64/ mysql

#cd mysql

#chown root:mysql -R .

#cp support-files/my-huge.cnf /etc/my.cnf

#cp support-files/mysql.server /etc/init.d/mysqld

#[ -x /etc/init.d/mysqld ] && echo "ok" || echo "NO"

确保当前在主节点上操作

#drbd-overview

0:mydrbd/0Connected Primary/Secondary UpToDate/UpToDate Cr----- /mydata ext3 2.0G 36M 1.9G 2%

#mkdir -p /mydata/data

#chown -R mysql:mysql /mydata/data/

#scripts/mysql_install_db --user=mysql--datadir=/mydata/data

vim/etc/my.cnf

datadir=/mydata/data

#chkconfig --add mysqld

#chkconfig mysqld off

#service mysqld start

确保启动OK

#/usr/local/mysql/bin/mysql -uroot -e "CREATE DATABASE mydb"

[root@node1mysql]# /usr/local/mysql/bin/mysql -uroot -e "SHOW DATABASES"

+--------------------+

|Database |

+--------------------+

|information_schema |

|mydb |

|mysql |

|performance_schema |

|test |

+--------------------

#service mysqld stop

#chkconfig --list | grep 3:off | grep mysql

mysqld0:off 1:off 2:off 3:off 4:off 5:off 6:off

[root@node1mysql]#

将存储资源切换到node2上，在node2MySQL配置好

#crm node standby

[root@node1mysql]# crm status

Lastupdated: Wed Jul 9 14:45:36 2014

Lastchange: Wed Jul 9 14:45:29 2014 via crm_attribute on node1.huhu.com

Stack:classic openais (with plugin)

CurrentDC: node2.huhu.com - partition with quorum

Version:1.1.10-14.el6_5.3-368c726

2Nodes configured, 2 expected votes

3Resources configure

Nodenode1.huhu.com: standby

Online:[ node2.huhu.com ]

Master/SlaveSet: MS_mysql_drbd [mysql_drbd]

Masters: [ node2.huhu.com ]

Stopped:[ node1.huhu.com ]

mystore (ocf::heartbeat:Filesystem): Started node2.huhu.com

[root@node1mysql]# crm node online

[root@node1mysql]# crm status

Lastupdated: Wed Jul 9 14:45:52 2014

Lastchange: Wed Jul 9 14:45:49 2014 via crm_attribute on node1.huhu.com

Stack:classic openais (with plugin)

CurrentDC: node2.huhu.com - partition with quorum

Version:1.1.10-14.el6_5.3-368c726

2Nodes configured, 2 expected votes

3Resources configure

Online:[ node1.huhu.com node2.huhu.com ]

Master/SlaveSet: MS_mysql_drbd [mysql_drbd]

Masters: [ node2.huhu.com ]

Slaves:[ node1.huhu.com ]

mystore (ocf::heartbeat:Filesystem): Started node2.huhu.com

[root@node1mysql]#

# scp /root/mysql-5.5.38-linux2.6-x86_64.tar.gz node2:/root/

# scp /etc/my.cnf node2:/etc/my.cnf

# scp /etc/init.d/mysqld node2:/etc/init.d/mysqld

在node2上安装MySQL

#tar zxvf mysql-5.5.38-linux2.6-x86_64.tar.gz -C /usr/local/

#cd /usr/local/

#ln -s mysql-5.5.38-linux2.6-x86_64/ mysql

#cd mysql

#chown root:mysql -R .

注意：千万不要手动创建/mydata/data，否则会导致文件损坏

缺少相关库文件# yum install libaio

#service mysqld start

#/usr/local/mysql/bin/mysql -uroot -e "SHOW DATABASES"

+--------------------+

|Database |

+--------------------+

|information_schema |

|mydb |

|mysql |

|performance_schema |

|test |

+--------------------+

[root@node2mydata]#

#service mysqld stop

#chkconfig mysqld off

配置MySQL成为集群资源

crm(live)#configure

crm(live)configure#primitive mysqld lsb:mysqld

crm(live)configure#verify

crm(live)configure# colocation mysqld_with_mystore inf: mysqld mystore

crm(live)configure#show xml

MySQL服务一定是跟MySQL存储资源在一起

crm(live)configure#order mysqld_after_mystore mandatory: mystore mysqld

crm(live)configure#verify

MySQL服务一定是在MySQ存储转移之后的，因此定义顺序约束

crm(live)#status

Lastupdated: Wed Jul 9 16:18:27 2014

Lastchange: Wed Jul 9 16:18:16 2014 via cibadmin on node2.huhu.com

Stack:classic openais (with plugin)

CurrentDC: node2.huhu.com - partition with quorum

Version:1.1.10-14.el6_5.3-368c726

2Nodes configured, 2 expected votes

4Resources configured

Online:[ node1.huhu.com node2.huhu.com ]

Master/SlaveSet: MS_mysql_drbd [mysql_drbd]

Masters: [ node2.huhu.com ]

Slaves:[ node1.huhu.com ]

mystore (ocf::heartbeat:Filesystem): Started node2.huhu.com

mysqld (lsb:mysqld): Started node2.huhu.com

crm(live)#

因此登录node2节点

#/usr/local/mysql/bin/mysql -uroot -e "SHOW DATABASES"

+--------------------+

|Database |

+--------------------+

|information_schema |

| mydb |

|mysql |

|performance_schema |

|test |

+--------------------+

#/usr/local/mysql/bin/mysql -uroot -e "DROP DATABASE mydb"

#/usr/local/mysql/bin/mysql -uroot -e "CREATE DATABASE testdb"

这里再次进行主从节切换

#crm node standby

#crm status

Masters:[ node1.huhu.com ]

Stopped:[ node2.huhu.com ]

mystore(ocf::heartbeat:Filesystem): Started node1.huhu.com

mysqld(lsb:mysqld): Started node1.huhu.com

#crm node online

Master/SlaveSet: MS_mysql_drbd [mysql_drbd]

Masters: [ node1.huhu.com ]

Slaves:[ node2.huhu.com ]

mystore (ocf::heartbeat:Filesystem): Started node1.huhu.com

mysqld (lsb:mysqld): Started node1.huhu.com

在node1节点上

#/usr/local/mysql/bin/mysql -uroot -e "SHOW DATABASES"

+--------------------+

|Database |

+--------------------+

|information_schema |

|mysql |

|performance_schema |

|test |

|testdb |

+--------------------

testdb正常显示

***给MySQL定义一个虚拟IP资源

crm(live)configure#primitive myip ocf:heartbeat:IPaddr paramsip=172.16.100.119 nic=eth0 cidr_netmask=24

crm(live)configure#verify

crm(live)configure#colocation myip_with_MS_mysql_drbd inf:MS_mysql_drbd:Master myip

crm(live)configure#verify

crm(live)configure#show xml

crm(live)configure#commit

crm(live)configure#cd ..

crm(live)#status

Lastupdated: Wed Jul 9 16:46:27 2014

Lastchange: Wed Jul 9 16:46:20 2014 via cibadmin on node1.huhu.com

Stack:classic openais (with plugin)

CurrentDC: node2.huhu.com - partition with quorum

Version:1.1.10-14.el6_5.3-368c726

2Nodes configured, 2 expected votes

5Resources configured

Online:[ node1.huhu.com node2.huhu.com ]

Master/SlaveSet: MS_mysql_drbd [mysql_drbd]

Masters: [ node1.huhu.com ]

Slaves:[ node2.huhu.com ]

mystore (ocf::heartbeat:Filesystem): Started node1.huhu.com

mysqld (lsb:mysqld): Started node1.huhu.com

myip (ocf::heartbeat:IPaddr): Started node1.huhu.com

crm(live)

可以看到myip已经在node1启动。

#ip addr

1:lo: mtu 16436 qdisc noqueue state UNKNOWN

link/loopback00:00:00:00:00:00 brd 00:00:00:00:00:00

inet127.0.0.1/8 scope host lo

inet6::1/128 scope host

valid_lftforever preferred_lft forever

2:eth0: mtu 1500 qdisc pfifo_fast stateUP qlen 1000

link/ether00:0c:29:a9:86:42 brd ff:ff:ff:ff:ff:ff

inet172.16.100.103/24 brd 172.16.100.255 scope global eth0

inet172.16.100.119/24 brd 172.16.100.255 scopeglobal secondary eth0

inet6fe80::20c:29ff:fea9:8642/64 scope link

valid_lftforever preferred_lft forever

#p#

5.在其节点上进行MySQL登录验证

登录MySQL创建用户

#/usr/local/mysql/bin/mysql -uroot -e "GRANT ALL ON *.* TO root@'%'IDENTIFIED BY '123.com';FLUSH PRIVILEGES"

#mysql -uroot -p123.com -h172.16.100.119 -e "SHOW DATABASES"

+--------------------+

|Database |

+--------------------+

|information_schema |

|mysql |

|performance_schema |

|test |

| testdb |

+--------------------+

[root@localhost~]#

在模拟主从节点切换：

#crm node standby

#crm node online

#crm status

Online:[ node1.huhu.com node2.huhu.com ]

Master/SlaveSet: MS_mysql_drbd [mysql_drbd]

Masters: [ node2.huhu.com ]

Slaves:[ node1.huhu.com ]

mystore (ocf::heartbeat:Filesystem): Started node2.huhu.com

mysqld (lsb:mysqld): Started node2.huhu.com

myip (ocf::heartbeat:IPaddr): Started node2.huhu.com

#mysql -uroot -p123.com -h172.16.100.119 -e "SHOW DATABASES"

[root@node2~]# crm

crm(live)# configure

crm(live)configure# show

nodenode1.huhu.com \

attributes standby=off

nodenode2.huhu.com \

attributes standby=off

primitive myipIPaddr \

params ip=172.16.100.119 nic=eth0 cidr_netmask=24

primitive mysql_drbdocf:linbit:drbd \

params drbd_resource=mydrbd \

op start timeout=240 interval=0 \

op stop timeout=100 interval=0 \

op monitor role=Masterinterval=50s timeout=30s \

op monitor role=Slaveinterval=60s timeout=30s

primitive mysqldlsb:mysqld

primitive mystoreFilesystem \

params device="/dev/drbd0" directory="/mydata" fstype=ext3 \

op start timeout=60 interval=0 \

op stop timeout=60 interval=0

msMS_mysql_drbd mysql_drbd \

meta master-max=1 master-node-max=1 clone-max=2 clone-node-max=1 notify=true

colocationmyip_with_MS_mysql_drbd inf: MS_mysql_drbd:Master myip

colocationmysqld_with_mystore inf: mysqld mystore

colocationmystore_with_MS_mysql_drbd inf: mystore MS_mysql_drbd:Master

ordermysqld_after_mystore Mandatory: mystore mysqld

ordermystore_after_MS_mysql_drbd Mandatory: MS_mysql_drbd:promote mystore:start

property cib-bootstrap-options: \

dc-version=1.1.10-14.el6_5.3-368c726\

cluster-infrastructure="classic openais (with plugin)" \

expected-quorum-votes=2 \

stonith-enabled=false\

no-quorum-policy=ignore

rsc_defaults rsc-options: \

resource-stickiness=100

crm(live)configure#

博文地址：http://d

网页名称：CoroSync+Drbd+MySQL实现MySQL的高可用集群
文章URL：http://www.gawzjz.com/qtweb2/news13/4063.html

网站建设、网络推广公司-创新互联，是专注品牌与效果的网站制作，网络营销seo公司；服务项目有等

声明：本网站发布的内容（图片、视频和文字）以用户投稿、用户转载内容为主，如果涉及侵权请尽快告知，我们将会在第一时间删除。文章观点不代表本网站立场，如需处理请联系客服。电话：028-86922220；邮箱：631063699@qq.com。内容未经允许不得转载，或转载时需注明来源：创新互联

猜你还喜欢下面的内容